Intermittent Motion Bottom Lap Sealer- 1606

1606LS Bottom Lap Seal Wrapper

The 1606 is Texwrap’s intermittent motion bottom lap seal wrapper designed to run consistently sized products at moderate speed. With a capacity of 15” wide and 5.5”tall, the 1606 is versatile enough to accommodate a variety of product sizes and configurations.

Flexibility and ease-of-use are hallmarks of Texwrap design. With standard autospacing control, horizontal as well as vertical photoeyes, and the ability to precisely vary the conveyor speeds to relax the film between products, the 1606 can accommodate randomly fed or choke-spaced product and accurately separate them for reliable, consistent packages using the absolute minimum amount of film.

The operator controls are located on a swivel-mount panel allowing it to easily be accessed from either side of the machine. The instructions are easy to understand, film threading is fast and easy, and, with the scrap winder in a very convenient location, operators are able to run the 1606 at maximum efficiency. With Allen-Bradley controls, AC inverter-duty motors, restricted service-level menus, and auto-tune heaters, the 1606 is as popular with maintenance staffs as it is with the operators.

If your shrink wrap application requires a high level of production performance across a wide variety of product sizes, true 24/7 reliability, maximum product flexibility, and minimum film usage, Texwrap’s model 1606 is the perfect solution.

 

  • Multiple seal options: static, drag wire, band seal, drag block and simultaneous
  • Various former styles available
  • 44″ flat film, PVC, poly, polyolefin
  • Dual roll film holder
  • Touch screen controlled heaters with auto tune
  • Hand wheel adjustments for the seal jaw opening and seal line height
  • Infeed and exit conveyor speed trim to control product spacing
  • Motion Trim™ for increased speeds
  • Allen Bradley PLC control
  • Swivel touch screen operator interface with step-by-step product set-up help screens to explain each function
  • Alphanumeric “save as” for programs, ability to “save to”, custom product codes
  • Diagnostic features on the touch screen
  • Pin perforator air evacuation system with brush back-up roller
  • Variable speed control with maximum belt speed of 120 feet per minute
  • Set-up scales on all mechanical adjustments
  • Dual speed modulation control automatically adjusts machine speed to match production flow (optional photo eye required)
  • Test mode to simulate product run for estimating purposes
  • Durable powder coat finish
  • Hot knife cross seal
  • Powered film unwind
  • Ambidextrous design

 

Model

1606 Bottom Lap Sealer

16″W seal bar

Infinite length x 15″W x 5.5″H

4″L x 3″W

Maximum 44″ flat film

208/240V,  16/19 amp, 1 phase,

80 PSI, 12 CFM

Adjustable From 34″ To 38″H

120 feet per minute

112″L x 48″W x 71″H

2,700 Lbs